Barrier
covers
Printed covers and jackets for crowd control and pedestrian barriers around a site, in mesh or PVC, made to the barriers you use.

Barrier covers we supply
- Crowd barrier covers for steel crowd control barriers
- Pedestrian barrier covers for site walkways
- Barrier jackets that slip over the barrier frame
- Barrier banners tied to the frame with cable ties
- Printed one side or both
- Mesh or PVC, chosen for how exposed the barriers are
- Covers in your site colours to match the rest of the perimeter
Covers, jackets and banners
Barriers line footpath diversions, site entrances and queues outside a site. A printed cover makes the line look deliberate and carries your name or a safety message.
- Jackets
- A sleeve that slips over the barrier and closes with hook-and-loop strips. Quick to fit and remove, and it covers the frame.
- Banners
- A flat printed banner with eyelets, tied inside the frame. The lowest cost, and easy to swap for a new message.
- Mesh
- Lets wind through, so barriers are less likely to be pushed over on open ground.
- PVC
- Solid colour and a full screen. Best where barriers are sheltered or well weighted.

Sizes and safety
- Crowd barriers
- Steel crowd control barriers are commonly about 2.3 m long and 1.1 m high, but sizes vary by maker. Measure one barrier, or send the make and model.
- Pedestrian barriers
- Plastic interlocking barriers are usually around 2 m long and 1 m high. Covers are made to the barrier you use.
- On the highway
- Barriers used for traffic management on a public road have to stay clearly visible under the Traffic Signs Manual rules for road works. Check with your traffic management contractor before covering them.
- Wind
- A cover adds wind load. Your site team should check the barrier feet and ballast for the cover and the location.
Barrier cover FAQs
Are barrier covers and barrier jackets the same?
A jacket is one kind of cover: a fitted sleeve. A cover can also be a flat banner tied to the frame. Both are printed the same way.
Do you supply the barriers?
No. We supply the printed covers. Hire or buy the barriers from your usual supplier and send us the size.
Can covers be reused on the next site?
Yes, if the message is general, such as your company name. Keep site-specific details on a separate panel so the covers move with you.
Do you also cover Heras fencing?
Yes. Covers for temporary fence panels are on our Heras fence banners page.
What to send for a barrier cover quote
- Number of barriers
- Barrier type, size or make
- Jacket or tied banner
- Mesh or PVC, one side or both
- Artwork or a logo, with any safety message
- Where and when the covers should arrive
Fill in what you can and send it. A rough idea is enough to start.
Or email info@perimeterprint.co.uk. We reply with a price, or with any questions we need answered first.