Perimeter Print Get a quoteQuote

Construction site signage

Mesh
banners

Perforated mesh banners that let the wind through, printed for site fencing, railings and scaffolding and finished ready to tie on.

Get a quote

A printed mesh banner rippling on a long site fence, with a scaffolded building behind.
Illustrative image

Mesh banners we supply

  • Printed mesh banners for fences and railings
  • Mesh covers for Heras fence panels
  • Mesh banners for scaffolding and building elevations
  • Mesh for palisade, weldmesh and sports ground fencing
  • Long runs printed with one continuous design
  • Single banners for branding or site messages
  • Flame-retardant mesh where the site asks for it
  • Cable ties, bungees or rope supplied with the order

What a mesh banner is

A mesh banner is a PVC-coated polyester fabric woven with thousands of small holes. Wind passes through the holes instead of pushing the whole banner like a sail, so the banner, its fixings and the fence behind it carry less load than with solid PVC.

Weight
Outdoor banner mesh is typically around 270 to 350 gsm. Heavier grades hold their shape better on long spans.
From the street
At a normal viewing distance the print reads as a solid image. Close up, and from the back, you can see through it a little.
Colour
Slightly softer than solid PVC, because part of the surface is open. Bold artwork and strong contrast work best.
Print
Usually printed on one side. For a finish on both faces, two banners are made and fixed back to back, or a solid material is used instead.
A close-up of a mesh banner hem and eyelet tied to Heras fence wire with a cable tie.
Illustrative image

Finishing and fixing mesh

Hems
Edges are folded and welded or stitched, often with a reinforcing tape, so the eyelets do not pull out of the fabric.
Eyelets
Brass or steel eyelets along each hem, typically every 50 cm, closer on exposed sites. Pole pockets or a rope hem are alternatives for some fences.
Fixings
Cable ties are the usual choice. Bungees give a little and suit windy positions; tensioned rope suits very long spans.
Wind
Mesh cuts the load but does not remove it. Whoever is responsible for the fence or scaffold should check it can carry a covered panel at that exposure.

Mesh banner FAQs

What are mesh banners good for?

Anywhere wind is a problem: construction fencing, scaffolding, railings, sports grounds and open sites. They are the default for Heras fence covers and scaffold wraps.

Are mesh banners see-through?

Partly. From a few metres away the image looks solid, but light and a faint view pass through. If you need a full screen, use solid PVC on a sheltered run. Our mesh or PVC guide compares the two.

How long do mesh banners last outdoors?

It depends on the grade of mesh, how well it is fixed and how exposed the site is. Banners that are tied every 50 cm and kept taut last far longer than ones left to flap. Tell us how long it needs to stay up.

Do you supply flame-retardant mesh?

Yes, where the site, client or insurer asks for it. We confirm the certificate the material carries before printing, as we do for scaffold banners.

What to send for a mesh banner quote

  • Banner sizes, or the fence or scaffold to cover
  • Number of banners
  • How exposed the position is
  • Artwork, or your logo and message
  • Delivery address
  • The date they are needed

Fill in what you can and send it. A rough idea is enough to start.

Or email info@perimeterprint.co.uk. We reply with a price, or with any questions we need answered first.

Get a quote

Site board
Service
Mesh banners
One file up to 8 MB: a drawing, site plan, photo or artwork. Optional.

We reply by email. A rough idea is enough to start.

Prefer email, or have several files? Create an email with these details, or to send to info@perimeterprint.co.uk.