Perimeter Print Get a quoteQuote

Construction site signage

Scaffold
banners

Large printed mesh and PVC banners for scaffolding, building elevations and fence lines, made in sections to suit the scaffold.

Get a quote

A building covered in scaffolding with a printed mesh banner showing the finished building.
Illustrative image

Scaffold and mesh banners we supply

  • Printed mesh scaffold banners
  • PVC banners for scaffolding and railings
  • Banners covering a whole elevation, made in sections
  • Banners showing the finished building
  • Mesh banners for fences, railings and grounds, including Heras fence banners
  • Flame-retardant banner materials
  • Replacement sections
  • Fixing kits

Scaffold banner materials

Mesh
Perforated banner mesh lets wind through and is the usual choice for scaffolding. From the street it reads as a solid image.
PVC
Solid PVC for lower lifts, railings and sheltered positions where you want full colour and no see-through.
Fire
Flame-retardant materials where the site, building, client or insurer requires them. Scaffold sheeting on UK sites is often specified to LPS 1215, in line with the Joint Code of Practice on fire prevention on construction sites. Banner materials are also tested to B1 (German) or M2 (French) standards; these are not UK equivalents of LPS 1215. We confirm which certificate the material carries before printing.
Life
Chosen for how long the scaffold stays up and which way the elevation faces.
A close-up of a mesh banner hem and eyelet tied to Heras fence wire with a cable tie.
Illustrative image

Large banners in sections

Sections
Large elevations are printed as drops or sections that are easier to handle and fix, with the artwork laid out so the joins fall in sensible places.
Hems
Welded or reinforced hems with eyelets along every edge, for tying to the scaffold tube.
Layout
Planned from the scaffold drawing or elevation, allowing for lifts, ties and boards.
Fixing
Your scaffolder or installer fixes the banner. Banners add wind load, so the scaffold design has to allow for them.

Scaffold banner FAQs

Does the scaffold design need to allow for a banner?

Yes. Any sheeting or banner adds wind load. Tell your scaffold designer the banner type and coverage early. Mesh is usually the easier option.

Can you print an image of the finished building?

Send the CGI or architect’s render at the highest resolution you have and we check it will hold up at full size.

How big can a scaffold banner be?

Very large banners are made in sections. We agree the section sizes with you so they suit the scaffold and can be handled on site.

What fire rating do scaffold banners need?

Whatever the site, client or insurer specifies. LPS 1215 is common for scaffold sheeting on UK sites. Tell us the requirement and we confirm which certified printable materials meet it.

What to send for a scaffold banner quote

  • Elevation width and height, or the scaffold drawing
  • Mesh or PVC, or how exposed the elevation is
  • Any fire certificate the site requires
  • Artwork, render or logo files
  • Site address
  • The date you need it on site

Fill in what you can and send it. A rough idea is enough to start.

Or email info@perimeterprint.co.uk. We reply with a price, or with any questions we need answered first.

Get a quote

Site board
Service
Scaffold banners
One file up to 8 MB: a drawing, site plan, photo or artwork. Optional.

We reply by email. A rough idea is enough to start.

Prefer email, or have several files? Create an email with these details, or to send to info@perimeterprint.co.uk.